arrow_forwardFIND WIRES QUICKLY AND ACCURATELY - Detect wires in a range of applications including buried wires, single strand, broken wires, etc. Not meant for live electrical wires. Suitable for Electrical wires, Landlines, Coaxial cables, Automotive cables etc...
arrow_forward"TRACE THROUGH OBSTACLES - Thanks to the Tone signal, you can track your cable through ceilings, under floors, inside walls, etc quickly without taking the risk of not knowing exactly where your wires are located (Use only one alligator clip in Tone Mode) "
arrow_forwardDETECTS SHORT/OPEN CIRCUIT/ TELEPHONE LINE - Thanks to the CONT mode, you can check for short and open circuits, and the RJ11 connector lets you test telephone systems easily (Use both Alligator clips in Continued Mode)
arrow_forwardADJUSTABLE SENSITIVITY - The variable sensitivity dial allows you to identify a single wire when multiple wires are routed in close proximity, ensuring precision and safety while avoiding false detection
arrow_forwardNO RISK - One-year warranty and friendly customer service from seller TrueToSource!
arrow_forwardProfessional Wire Tracker. It can help you quickly find the target line in many pairs. It is suitable for tracking RJ45 internet cable, RJ11 telephone line and other metal wire in low electricity. Please note that it can not be used to track wires with high electricity ( maximum currents for emitter and receiver are 10mA and 30mA respectively, and maximum voltage is 10V ). Besides, you may need two 9V laminated cells, which are NOT included in the packaging of this item.
arrow_forwardNetwork Cables Verifying. Plug one side of the cable into the emitter and the other side into the receiver. Select "Network" to check and verify whether the network cables are good or not. No need of network tester.
arrow_forwardWire Tracking. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. It is recommended to stripe down some of the wires when connecting through the clip. Select "SCAN". Emitter works properly if the "SCAN" indicator is on. Use the receiver to find target wires. No need of multi-testers.
arrow_forwardTelephone Line Test. The work of the telephone line of the detection of various states, only the transmitter can be detected, such as determining TIP or PING line, to determine the work of the telephone line idle, ringing and off-hook state.
arrow_forwardAdditional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating.
arrow_forwardApplication: wire-tracer is a must-have Tester for audio/video Installer and data COM technicians
arrow_forwardDesign: adaptor plugs include: RJ-45, RJ-11, Coax, automotive fuse blade and insulated Clamps
arrow_forwardDesign: adjustable sensitivity and positively identifies a single wire when multiple wires are routed in close proximity
arrow_forwardDesign: operates from (2) AAA batteries for the transmitter and (4) LR44 batteries for the receiver (included)
arrow_forwardFeatures: audible and visual indication and an auto-shutoff after 45 minutes
arrow_forwardIncludes a professional grade tone generator and tracing probe for non-active wiring
arrow_forwardToner-Pro features 5 distinct tone cadences, transmits 1,000+ feet
arrow_forwardRugged Angled Bed of Nails (ABN) clips securely attach to wires
arrow_forwardRJ11 plug easily connects to telephone and RJ45 data jacks to tone wire pair
arrow_forwardToner-Pro tests for continuity and polarity with results indicated by clearly labeled LEDs
arrow_forwardTone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline
arrow_forwardSends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs
arrow_forwardPrecise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip
arrow_forwardPro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack
arrow_forwardPush button switch selects Solid, Alt and Off
arrow_forwardQuickly and easily identify correct circuit breaker or fuse protecting a specific electrical circuit
arrow_forwardDesigned for operation at 120V AC, 60Hz
arrow_forwardAudible alert and bright LED visual indication
arrow_forwardMagnetic back attaches to electrical panels for inchhands-free inch operation
arrow_forwardWhen used with CS61200AS accessory kit, unit can trace switches, light fixtures, and other energized wiring
arrow_forwardThis circuit breaker finder can find the corresponding circuit breaker of any 120V standard electrical outlet quickly, accurately, and automatically
arrow_forwardFlashing arrow indicator for easy identification
arrow_forwardStrong transmitter reaches distances up to 1000-feet
arrow_forward90 to 120V operation
arrow_forwardMicroprocessor controlled for more reliable identification
arrow_forwardSimply plug the GFCI Transmitter into an outlet and trace for the correct breaker at the electrical box
arrow_forwardIR resolution - 43,200 (240x180) pixels - far exceeds RESNET standard; Measurement modes include 3 Spots, 3 Area Box, Isotherm, Auto Hot/Cold spots
arrow_forwardUL Listed and CE approved
arrow_forwardTests GFCI circuits
arrow_forwardLED indication of 2 test conditions and 5 wiring faults
arrow_forward▲ MULTIFUNCTION WIRE TRACING - Fast to locate the breakpoint without wire's cover damage, find the required line among numerous ones, perfect for tracking RJ11, RJ45, cables or other metal wire (via adapter)；And also with the Battery（10V-110V） positive and negative measurements function
arrow_forward▲NETWORK & TELEPHONE LINE TEST - The Line Finder testes physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection; Use the emitter to test the status of working of telephone lines (such as judging TIP or RING line), test the line level, positive and negative polarity detection; Adjust the volume of receiver by pressing the volume rotary knob
arrow_forward▲WIRE TRACKER - The Line Finder can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip; In this situation, the wires must be in power-off status, otherwise the units will be damaged; It is recommended to stripe down some of the wires when connecting through the clip; Select "SCAN"; Emitter works properly if the "SCAN" indicator is on; Use the receiver to find target wires
arrow_forward▲EARPHONES DESIGN&TWO LED Light - With a pair of Earphone, you can just connect the earphone to the headset jack of receive to get clear information in a noise environment; Notice that if the sound is low, you should check whether the battery is powered off or not, and the LED flashlight allows operation in dark situation
arrow_forward▲PACKAGE CONTENT - TACKLIFE CT03 Wire Tracker Emitter, TACKLIFE Wire Tracker Receiver, RJ45 Adapter Cable, Crocodile Adapter Cable, 9V Batteries, Earphone, Black Case, English User's Manual, 24-Month Service Card.✚FREEBIE:A free high-quality cloth bag