10 Best Snap On Electric Pressure Washers

arrow_forwardReliable performance with 2-year: 2200 psi @ 1. 2 GPM from the axial cam pump generates the power you need for a wide range of cleaning applications; The reliable 13 amp liquid cooled electric motor runs quiet season after season. Motor and pump are backed by a 2-year industry leading.
arrow_forward“Live” hose reel: The 25’ hose is attached directly to the water supply, just pull out as much or as little hose as you need and start cleaning! When done cleaning just fold out the handle and wind up the hose. Quick and easy set-up and clean-up every time!
arrow_forwardMetal Roll-Cage frame cart: stable cart design has a low center-of-gravity to prevent tipping and 8” PVC wrapped wheels are easy to roll over all terrain. Integrated accessory storage Includes locations for spray gun and cleaning nozzles. Convenient storage bin located on back of frame for brushes, Sponges and cleaners.
arrow_forward1-Gallon super soap tank: large capacity tank allows you to clean longer between refills to get the job done quicker. Wide-mouth opening makes refills easy and no spills of expensive cleaners.
arrow_forwardComplete cleaning system – YF2200LC everything included: 4 quick-connect nozzles: 15°, 40° and soap plus bonus turbo nozzle. Trigger handle and metal wand with brass quick-connect fitting accept all standard pressure washer accessories. 25’ non-marring hose and nozzle cleaning needle.

arrow_forward1800 PSI, 1.2 GPM electric pressure washer with convenient on/off foot switch
arrow_forwardFolding handle for compact storage, takes up less garage space
arrow_forwardIncludes three nozzles: turbo nozzle for maximum cleaning power on stubborn areas, 15° all-purpose nozzle and detergent nozzle
arrow_forwardLarge removable bin for hassle-free storage of accessories and personal items
arrow_forwardEasy 5 minute setup – no tools required!

arrow_forwardThe ROP Shop replacement 3/4" Shaft, Horizontal Triplex Pump for Pressure Washer with 3600 PSI and 2.5 GPM
arrow_forwardSpecs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM, 6.5 HP, Male Outlet: 22mm Threaded, Standard Garden Hose Inlet, 3/4" Horizontal Shaft. Refer to images 2 and 3 for more information
arrow_forwardIncludes - (1) Pump & (1) Keyway; comes as shown in the first image
arrow_forwardPump comes with built in Unloader, Chemical Injector, Thermal Release Valve, & Oil Sight Glass
arrow_forwardWhen installing, please ensure that the keyway is in place before running your pressure washer

arrow_forwardNew 3000 psi PRESSURE WASHER WATER PUMP
arrow_forwardFits Karcher G3050 OH G3050OH w/ Honda GC190
arrow_forward2800-3000 PSI / 2.4 GPM - MAX 2.5 GPM
arrow_forwardBRASS HEAD PUMP with 3/4" Shaft
arrow_forwardQuality Aftermarket Part with 1 Year Warranty

arrow_forwardPower Washer Axial Horizontal Pump series 15 Full Brass Head
arrow_forwardFlow Rate 3.0 GPM Pressure 2700 PSI
arrow_forward3/4 Inches shaft suitable for engine 5.5 and 6.5 HP like GX160
arrow_forwardPLUNGER SEALS Germany Parker Include detergent injector and Thermal relief valve
arrow_forwardOutput:M22 -14mm Standard Input: Garden hose connection

arrow_forward2600 psi Power Pressure Washer Water Pump
arrow_forwardSpecs: 2400-2600 PSI  /  2.3-2.4 GPM
arrow_forwardGarden hose hookup / 22mm Outlet
arrow_forwardFits 7/8" Short Shaft Engines 1-1/2" or less
arrow_forwardFits Karcher Models with 7/8" Shaft and 4-Bolt Pattern

arrow_forwardRMW 3400rpm
arrow_forwardD Version 3/4-Inch
arrow_forwardVertical Gas Engine Flange

arrow_forward2600 psi Pressure Washer Water Pump
arrow_forwardFits Many Makes & Models with Honda GC160 Horizontal Engine 7/8" Shaft
arrow_forwardSpecs - 2400-2600 PSI,  2.3-2.4 GPM, Garden hose hookup, 22mm Outlet
arrow_forwardFits 7/8" Short Shaft Engines 1-1/2" or less
arrow_forwardDoes not fit all Honda GC160 Engines

arrow_forward3000 PSI Power Pressure Washer Water Pump
arrow_forward2800-3000 PSI / 2.4 GPM - Max 2.5 GPM
arrow_forward3/4" Shaft - Horizontal Brass Head Pump

arrow_forwardBRAND NEW OEM PRESSURE WASHER PUMP FOR 2800-3000 PSI UNITS
arrow_forwardSpecs:2800-3000 PSI / 2.4 GPM - MAX 2.5 GPM FACTORY RATING, BRASS HEAD PUMP, INCLUDES THERMAL RELEASE VALVE, Chemical Injector. FITS 3/4" SHAFT HOLE DISTANCES ARE 2 5/8" CENTER TO CENTER ON OUTER HOLES / 1 7/8" FROM CENTER SHAFT HOLE TO EACH OUTER HOLE.
arrow_forward**Fits Honda Excell units with 3/4" shaft only!!! Some Excell units have the 7/8" shaft and this pump will not work!**
arrow_forwardUNIVERSAL PUMP - FITS MANY MAKES AND MODELS! INCLUDES THERMAL RELEASE VALVE