arrow_forward► DURABLE - The Zone Tech leveling ramps are lightweight in design but can also hold up at a maximum weight capacity per axle of 11,000lb.
arrow_forward► ANTI-SLIP - The Zone Tech leveling ramps features rigid grips and anti-slip surface to secure your automotive in place. Also has a solid base which means it will not sink into soft ground.
arrow_forward► 3 LEVEL DESIGN - The Zone Tech leveling ramps has three stage design that lets you adjust and and raise your vehicle to your desired height.
arrow_forward► PREMIUM QUALITY - The Zone Tech leveling ramps is made of high quality tough polypropylene plastic for superior strength and durability.
arrow_forward► EASY TO USE - The Zone Tech leveling ramps are easy to use. Simply assess which wheel side needs to be leveled and slip it in front of the wheel and drive through it.
arrow_forwardINCLUDES TWO LEVELERS, TWO CHOCKS, AND TWO GRIP MATS (Does NOT include a bag) - PRECISE, FRUSTRATION FREE LEVELING IN ANY INCREMENT FROM 1/2 INCH TO 4 INCHES IN UNDER 5 MINUTES - Are you ready for smooth, precise leveling experience without the hassle of stacking plastic blocks or wood under your tires and guessing each time? Make leveling your rig a lightning fast and precise task. Easily level your trailer any increment from 1/2 inch up to 4 inches. Each leveler is roughly 6" wide by 15" long.
arrow_forwardPATENT PENDING ULTRA STRONG LEVELERS ARE BUILT WITH HIGHEST QUALITY NYLON POLYMER CONSTRUCTION TO LAST A LIFETIME - Unlike other camper levelers that snap in half under 6000 lbs of load, the Beech Lane leveler is constructed with an extremely high performace nylon polymer used typically in structural load bearing applications. The result is a ROCK SOLID leveler that does not eventually break or compress under the weight of the trailer like other levelers do that are made of HDPE or PP.
arrow_forwardINCLUDED RUBBER GRIP MATS TO HELP PREVENT LEVELER FROM SLIDING WHEN BACKING ON - Thanks to constructive customer feedback Beech Lane has developed custom rubber grip mats that help to prevent leveler sliding when backing the camper tire onto the leveler. **The Levelers Now Come WIth Rubber Grip Mats Instead Of Grip TAPE**
arrow_forwardTWO LEVELERS CAN BE USED FOR DUAL AXLE TRAILERS, BUT UP TO 4" MAY NEED TO BE CUT OFF THE END OF ONE LEVELER DEPENDING ON HOW MUCH SPACE IS BETWEEN TIRES - For dual axle trailers one leveler may need to be cut to length to fit, up to 4" can be cut off the leveler with no adverse effects. The amount of space needed between tires to fit without cutting depends on tire size. Typically it is about 2.5" to 3" of space, but this varies with tire size.
arrow_forwardCOMES WITH THE BEECH LANE LIFETIME WARRANTY - Unlike other brands that have a short return policy window, Beech Lane has a LIFETIME WARRANTY on the levelers and chocks. Even if you cut the leveler to fit your dual axle trailer, you still get full protection under warranty. If you experience any issue down the line contact Beech Lane for a free replacement or complete refund.
arrow_forward10 interlocking blocks stack to the desired height for safe and easy leveling
arrow_forwardStrong and durable construction
arrow_forwardSolid bottom to help keep them from sinking in soft ground
arrow_forwardIncludes zippered storage bag with handle
arrow_forwardEach leveling block measures 8.5 inch x 8.5 inch x 1 inch
arrow_forward✔ ANTI-SLIP JOINTING SYSTEM: Carmtek engineers have developed a special jointing system with precise grip channels on the surface of the levelers to prevent levelers from sliding when backing the camper tire onto the levelers.
arrow_forward✔ HEAVY-DUTY CONSTRUCTION: Built with a high-performance polymer, Carmtek Camper Leveler is made to last a lifetime. Our Camper Levelers works with any trailer that weighs up to 35,000 Lbs and with tires up to 32" diameter.
arrow_forward✔ FAST & PRECISE LEVELING: Avoid the hassle of setting up your camper with travel trailer leveling blocks or planks under your tires. Make trailer leveling a fast and precise task. Simply level your trailer any increment between 1/2" and 4" in less than 5 minutes.
arrow_forward✔ LEVELER TRIMMING FOR TIGHT DUAL AXLES: For some dual axle trailers one leveler may need to be cut to length to fit (depending on how much space is between tires), up to 4" can be cut off the leveler with no adverse effects. Typically, the amount of space needed between tires to fit without cutting is about 2.5" to 3" of space, but this varies with tire size. Our package includes clear and detailed instructions regarding the trimming of the levelers.
arrow_forward✔ LIFETIME WARRANTY: If you experience any issue down the line you are guaranteed a free replacement or complete refund.
arrow_forwardLEVEL YOUR CAMPER, RV, OR TRAILER IN 5 MINUTES OR LESS WITH THE BEST LEVELER KIT ON THE MARKET! Are you ready to experience the BEST levelers for your RV? Level your camper, RV, or Trailer on the FIRST TRY by simply driving on until level. Chock. Done. Nothing is easier to use than the innovative Andersen Hitches Camper Leveler Kit. You’ll literally be ready to roast hot dogs, s’mores, or head out to go hiking or fishing in 5 minutes or less!
arrow_forwardEXPERIENCE THE ONLY ON-THE-FLY, PRECISE CAMPER LEVELING SYSTEM AT ANY INCREMENT BETWEEN 1/2" AND 4" (LIFTS UP TO 4") RIGHT FROM THE DRIVER’S SEAT. AVOID THE HASSLE, HEADACHE, AND WASTED CAMPGROUND TIME OF SETTING UP YOUR RV OR CAMPER WITH BLOCKS AND PLANKS. Don't get in and out of the driver's seat and/or make your spouse or significant other drag blocks or heavy planks around…. and stop worrying about a plank flying out at someone’s shin - or head!
arrow_forwardTHE CAMPER LEVELER WORKS PERFECTLY ON ANY TRAILER UP TO 30,000 LBS & WITH TIRES UP TO 32" DIAMETER. IF YOUR RV MEETS THESE REQUIREMENTS, YOU’LL BE ABLE TO USE THE ANDERSEN CAMPER LEVELING SYSTEM RIGHT OUT OF THE BOX! If you have dual tires or smaller spaces to fit the camper leveler between, sometimes they need trimmed. This is simple and easy to do and takes less than 10 minutes. If you buy the camper levelers and they don’t work for you, we’ll take them back and give you a refund!
arrow_forwardYOU ONLY NEED ONE LEVELER PER AXLE ON ONE SIDE OF THE TRAILER. With the Andersen Camper Leveler, you don't need to level both sides of the trailer - only put them on the low side.
arrow_forwardMAKES THE PERFECT GIFT!!! ARE YOU READY TO GET STARTED ENJOYING YOUR FIRST DAY OF CAMP INSTEAD OF STRUGGLING THROUGH SET-UP? SIMPLY CLICK THE YELLOW ADD TO CART BUTTON AND CHECKOUT NOW. YOU’RE ONLY ONE BUTTON AWAY!
arrow_forward🔒ORIGINALITY PROCESS: The Kohree RV lock is well-constructed with multiple casting process and aluminum alloy material. Featuring the high hardness, each side is carefully designed to be safe and durable. Oxidation treatment, wear resistance. Smooth surface, hand good sense of easy open. The classic square silhouette shows the ingenious imagination of the designer from Kohree.
arrow_forward🔒PREMIUM & DURABLE: Thickened solid base for stable installation. Selected quality aluminum alloy and IPX3 waterproof material, providing years of dependability and durability for long-term outdoor use. Additionally, the keys are made of ALL metal and it is not easy to fracture.
arrow_forward🔒LONGER SCREWS: Comes with 4 EXTRA, 3MM LONGER screws(12 total), not worry about screws too short or any unfit any more. Includes everything for installation: door latches, 4 keys, 12 screws and 2 plates, easy operation.
arrow_forward🔒VERSATILE DOOR LOCK: Fits most RV doors (hole cutout is 2.67'' x 3.6'' and door thickness from 1.25" to 1.5"). It can be widely applied in travel trailers, campers, trucks, horse trailers, cargo haulers, etc., practical for protecting the contents in cars.
arrow_forward🔒SAFE & PROTECTIVE: With built-in deadbolt and function of back locking, it’s much safer than normal lock. Inside and outside double open, mute design and smooth switch, not card lock, better protecting your goods and commercial material from thefts.