10 Best Raid Controllers
- Home
- Categories
- Electronics
- Computers & Accessories
- Raid Controllers

Product Highlights
arrow_forwardPCIe 4X to 4 SATA III 6Gbps interfaces; transfer speeds up to 6Gbps; backwards compatible with SATA 1.0/2.0 of 1.5/3.0Gbps.
arrow_forwardPCI-Express V2.0 also compatible with PCI-Express V1.0, can be used on PCIe X4 X8 X16 slots.
arrow_forwardPort Multiplier FIS-based and Command-based switching supported; Chipset: Marvell.
arrow_forwardSupport Native Command Queue (NCQ); Support IDE/AHCI 1.0 mode; Compatible with SATA 6G, 3G and 1.5G Hard Drives; Support Hot Plug and Hot Swap.
arrow_forwardSupport RAID Model: RAID0, RAID1, RAID10, and HyperDuo. Support Windows XP/Vista/7/8/Sever 2008 R2/10(32/64 bit) and newer.

Product Highlights
arrow_forwardWith this 4x PCIe SATA card, 6 large capacity storage devices can be connected. Supports 6 SATA Rev 3.0 transfer speeds of up to 6.0 Gbps / s, 3.0 Gbps and 1.5 Gbps. Support hot swap.
arrow_forwardSupport system : Windows XP / 7/8/10 / Linux. Support interface : PCI-E 4X 8X 16X.(Use under PCI-E 3.0 will be faster)
arrow_forwardThis PCIe SATA card contains 6 SATA cables for easy connection! You can connect 6 large capacity storage devices at the same time.
arrow_forward1 SATA power plug to 4 SATA power sockets Scope of delivery: StarTech.com 4x SATA splitter adapter cable - 4-way serial ATA cable.


Product Highlights
arrow_forwardRAID level 0, 1, 5, 10 and JBOD
arrow_forwardMultiple RAID support
arrow_forwardBios boot to RAID with point-to-point connectivity or through port Multiplier
arrow_forwardQuick, background or foreground initialization
arrow_forwardOce/orlm (online capacity expansion/online RAID level Migration)

Product Highlights
arrow_forwardController: SAS 2008 controller for 8-port 6Gb/s to PCIe
arrow_forwardHost Bus Type: 8-line PCIe 2.0, X8
arrow_forwardConnectors: 2-port Mini-SAS SFF-8087
arrow_forwardData Rates: Up to 6 G SATA and SAS link rates, SAS 2.0 complian; Support 256 SAS and SATA device
arrow_forwardSystems Support: Windows, Linux RedHat, LinuxSUSE Enterprise Server(SLES), Solaris,and VMware

Product Highlights
arrow_forward☞【SATA】 --- Sata Pcie Card, Support four internal SATA interfaces, transfer rate up to 1.5Gb/sM, support SATA 1.0 standard, 256-byte FIFO port for fast read/write operations
arrow_forward☞【For RAID】 --- Sata Controller Card, RAID 0, use for RAID 1, use for RAID 5, use for RAID 0 +1 mode, support JBOD
arrow_forward☞【SUPPORTED DEVICES】 --- Hard disk, CDROM, DVD ROM, CD-R, CD-RW, DVD-R, DVD-RW, etc.
arrow_forward☞【SYSTEM REQUIREMENTS】 --- Sata Expansion Card, There is at least one available 32-bit PCI slot on the PC. The bus speed is 33MHz / 66MHz; PCI 2.3 standard.
arrow_forward☞【SUPPORTED OPERATING SYSTEMS】 --- 4 Port SATA RAID Card, Suitable for Windows 98SE / Me / 2000 / XP / NT 4.0 / XP 64-bit / Vista / Linux and Netware OS.


Product Highlights
arrow_forwardWith this PCIe SATA card, you can add Eight SATA 3.0 6 Gbps devices to your computer (two of the satellites require a driver).
arrow_forwardThe PCIe SATA card contains eight SATA cables to simplify the connection!
arrow_forwardUse the Marvell 88SE9215 + JMicron JMB5xx chip to improve card stability and compatibility
arrow_forwardConnect 8 mass storage devices at the same time. With Windows XP / 7/8/10 / MAC / NAS / Ubuntu
arrow_forwardNote: The 8-port does not support RAID. The RAID in INTEL is only for original SATA. It is an expansion card that cannot support third-party chips.