10 Best Microphone With Shock Mounts

arrow_forwardPackage include Microphone Shock Mount + Pop Filter,and come with one free universal connector adaper,Combination with these two making your broadcast or singing voice sounds more pleasant. Perfect with microphone suspension boom scissor arm stand
arrow_forwardPop filter:U-shaped double net layer structure, foam layer, metal net layer can effectively reduce the plosive, wind interference, saliva spraying
arrow_forwardShock mount:Made of high quality metal and high elasticity rope. It can protect the microphone all-around with high elasticity wrap roping desigh, which make the microphone more convenient to install and prevente the microphone from falling
arrow_forwardShock mount for microphone type: Diameter of 46mm-53mm microphone. Outer frame diameter:95mm.Height:80mm.Not for blue yeti. Please Verify your microphone size before ordering
arrow_forwardPop filter for microphone type: Diameter of 41mm-61mm microphone.H*L*W:8*8*8mm

arrow_forwardEXCELLENT SOUND QUALITY: The microphone gives you up to 24bit/192khz bit sample rate, so your recordings will be crystal clear. And it has a wide frequency response (30 hz to 16khz) and provides superb sound reproduction quality for high-resolution audio
arrow_forwardCARDIOD PICKUP PATTERN: The cardioid pickup pattern offers pristine and accurate capture. It records sound sources that are directly in front of the microphone, reducing unwanted background noise
arrow_forwardUSB PLUG & PLAY: High quality desktop recording is made simple! just plug the usb microphone into you computer’s port, it even works automatically with your mac or pc. No drivers required
arrow_forwardNOISE ELIMINATION ACCESSORIES: The microphone comes with a microphone stand, shock mount, table clamp, anti-wind foam cap, usb a to b cable, and a pop filter. These accessories can effectively minimize the noise from unwanted vibrations or plosives
arrow_forwardHIGH COMPATIBILITY: It can fully compatible with most mainstream operating system such as windows and mac os. The microphone can also use for mobile phone, but you need an adapter(not included)

arrow_forwardCOMPATIBILITY: The shock mount is compatible with Blue Microphones Snowball and Snowball ice Microphones
arrow_forwardABSORBS VIBRATION: The mount flexes its corded muscles to combat vibrations
arrow_forwardDURABLE: A steel frame ensures strength and long life
arrow_forwardSECURE CLAMP WITH LOCKING KNOB: A locking knob to adjust the angle 180 degrees
arrow_forwardWARRANTY: Includes a two year warranty

arrow_forwardShock mount with pop filter for most condenser microphones. Package includes all the items you need to get better audio performance results. A microphone shock mount with a pop filter and a standard metal screw adapter.
arrow_forwardMic shock mounts are made of quality metal and high elasticity rope, isolates mic from physical vibration, floor, and stand noise, prevent unwanted movement of the microphone when you are recording. The added foam pad to the microphone clamp to prevent the microphone from damage and scratches.
arrow_forwardPop filter designed with metal mesh and foam layer, ''U-shaped'' pop filter can effectively reduces the plosive, pops, crackles, wind interference, breath sounds from front and both side. Helps get your best vocal recordings. It can prevent your microphone from saliva spraying and dust.
arrow_forwardHandy and quick to assemble and disassemble from the microphone by pushing the metal handle adjust the angle by locking knob. The mic shock mount standard 5/8"-27 thread with a 3/8"-5/8"screw adapter can attach to any universal mic boom or stand. The pop filter firmly fixed on your mic with the combination design of elastic bands and inner rubber ring.
arrow_forwardNote: Universal microphone shock mount fits diameter 46mm - 53mm(1.85''-2.08'') microphone, the pop filter fits 45mm - 63mm diameter microphones. Please confirm the size of your microphone before ordering.(Not Fit AT4040, Blue Yeti, Blue Snowball, Blue yeti nano).

arrow_forwardThis professional suspension shock mount isolates most studio condenser mics from physical vibration, floor, and stand noise.It is a very nice shock mount for most large diaphragm condenser microphones.
arrow_forwardMade of high quality metal and high elasticity rope. It can protect the microphone all-around with high elasticity wrap roping desigh, which make the microphone more convenient to install and prevente the microphone from falling.
arrow_forwardStandard 5/8"-27 thread with a 3/8"-5/8"screw adapter,features an angle adjustment with locking knob,so you can mount it on all the standard microphone stands.
arrow_forwardThis shock comes with a Foam insert,which is use to hold and protect microphone.
arrow_forwardNOTE: The shock mount only fits microphone diameter ranging from 48mm ~54mm. PLEASE VERIFY your microphone size BEFORE ORDERING!

arrow_forward◮Anti vibration and noise - This shock mount mic holder can isolate condenser mics from most physical vibration, floor, and stand noise effectively. And it’s ideal for recording, podcasting, broadcasting and more. It will make your broadcast or singing voice sound better.
arrow_forward◮Applicable for many mic types - One shock mount is equipped with 4 different bottom screws, which can compatible with multiple microphone styles, for instance, AT(2020, 2020 USB), Rode(NT1-A, Procaster, Podcaster, K2, NTK, NT2000, NT2-A, NT1000), Samson(C01, C03, C01U, C03U, CL7, CL8), Blue(Bird SL, Babybottle SL, Spark SL except Yeti, Snowball, Nano), MXL(990, 770, R77, TEMPO, V67G, Revelation, 2006) and Neumann (U87).
arrow_forward◮Durable and Adjustable-The shock mount was totally made of Heavy-duty solid metal, except the elastic band and pad. It also came with mounting pads to protect the bottom of the mic. Features an angle adjustable locking knob with a 5/8 inch screw hole, which can be easily attached to any universal mic boom arm or stand.
arrow_forward◮! NOTE ! - 1. The shock mount is not compatible with handheld mic, such as SM58, Q2U, ATR2100. 2. It’s also not suitable for many USB microphone with function knobs, such as Fifine, Blue Yeti/Snowball, Razer. (The threads’ diameters which are less than 20mm are not suitable. Many USB microphones’ bottom threads are 5/8 inch which is far less than 20 mm.) 3. Microphones without threads at the bottom cannot be tightened on our shock mount, such as AT2035/2050, Heil PR40.
arrow_forward◮Best service - We promise to provide timely response within 24 hours and lifelong technical guidance.

arrow_forwardThe shock mount are made of quality metal and high elasticity rope, isolates mic from physical vibration, desk,floor, and stand noise, making your broadcast or singing more clear.
arrow_forwardFoam insert to hold and protect microphone.
arrow_forwardThe shock mount only fits microphone diameter ranging from 22mm ~26mm
arrow_forwardFeature an angle adjustment with locking knob.
arrow_forwardStandard 5/8" thread with a 3/8"-5/8"screw adapter,so you can mount it on all the standard microphone stands.

arrow_forwardBlack Universal Microphone Shock Mount for Large Diameter Condenser Microphone,Metal Construction
arrow_forwardFits microphone diameter ranging from 48mm ~51mm
arrow_forwardFeatures an angle adjustment with locking knob

No Information to Display