10 Best Marine Subwoofers
- Home
- Categories
- Marine Subwoofers

Product Highlights
arrow_forward6. 5" 2-Way Coaxial Full Range Marine Grade Speakers, Pair
arrow_forwardPeak Power: 320 Watts (Pair) | RMS Power: 160 Watts (Pair)
arrow_forwardPremium Microfiber Composite Mineral Filled Mid-Woofer Cone with Butyl Surround
arrow_forward1" Marine Grade Silk Dome Tweeter Mounted on Top of Mid-Range for Balanced Sound
arrow_forwardImpedance: 4 Ohms | 1. 2" SV Voice Coil

Product Highlights
arrow_forward8'' Slim Marine Woofer - Phase Shift Switch : 0 or 180° - Thermal , Short and Overload Protection Circuits - Dimension : 14.5''(D) x 9.5''(W) x 3''(H)
arrow_forwardRCA Low Level Input - Adjustable Input Sensitivity : 0.2V-3V - Fuse : 2 x 15A - Weight : 10.5 LBS
arrow_forwardHigh Level Input - 0 to +12Db Variable Bass Boost (@ 45Hz) - Max Power : 1000 Watts
arrow_forwardGreen and Red LED Power Status Indicator - Low Pass Filter (50-150 Hz) - RMS Power : 300 Watts
arrow_forwardRemote Level Control - Soft Delay Remote Turn-On - RMS Power of Amplifier : 100 Watts

Product Highlights
arrow_forward400 WATT POWER: Pyle’s 8 Inch Marine Subwoofer offers a peak power of 400 watts w/ 4ohm impedance. It lets you pump out some great low frequency bass volume to enhance the party vibe making it a great addition to your marine music audio system
arrow_forwardFOR ENHANCED SOUND: The Hydra subwoofer is a great addition to your marine stereo sound system. No sound system is complete without the perfect subwoofer for complimentary bass so don't deprive your boat from the absolute best sound you can get
arrow_forwardWATER-RESISTANT: The professional compact loud speaker system features a marine grade waterproof plastic case construction making it safe to be installed and used in places where moderate water splashes occur such as in marine vehicles
arrow_forwardSUPERIOR POWERFUL SOUND: The white outdoor bass speaker features an 8” high quality polypropylene cone. The 40 oz. magnetic structure and 1.5” high temperature voice coil boom w/ power and achieve a frequency response of 35 Hz to 3.5 kHz
arrow_forward8” SINGLE SUBWOOFER: The boat subwoofer can be installed under or in front of the compartment or helm, behind the helm seat or you can mount them inside a box or cooler. The subwoofer has an overall diameter of 8.5” and 3.60” mounting depth

Product Highlights
arrow_forward10" MX Series Infinite Baffle Marine Subwoofer Driver Power Handling: RMS: 175 watts Impedance: 4 ohm Injection-molded, mica-filled polypropylene cone woofer provides excellent durability Synthetic rubber surround for Very long linear excursion Specifically engineered Centrex polymer baskets for corrosion and UV-resistance Specifically optimized for infinite-baffle applications Proprietary Dynamic Motor Analysis (DMA) technology reduces distortion and improve sound quality White classic grille for superior woofer protection Gold-plated, brass binding posts terminals Sensitivity: 87.23 dB Xmax: 10.7 mm Mounting Depth: 5-1/8" Cutout Diameter: 8-7/8" Color: White w/ Classic Grille

Product Highlights
arrow_forward2-Way 4" Marine Grade HIFI Full Range Stereo Pod Speakers with 1" PEI Dome Tweeter
arrow_forwardCompact and Powerful: Maximum handling 100 watts(A Pair) , Frequency response 80 - 20,000Hz , Impedance 4 ohms
arrow_forwardMarine Grade Waterproof Construction:IP66, Perfect for Marine, Boat, UTV, ATV, Truck, Golf Cart, Powersport, Motorcycle, Motorbike, RV, Automobile & Off-Road Vehicles
arrow_forwardSmall 4" Size for Easy Installation where limited space available; Product Dimensions 4.4"(112mm) (W) x 4.4"(112mm) (H) x4"(102mm) (D)
arrow_forwardWhat you get: A Pair of self-contained pod speakers with mounting brackets

Product Highlights
arrow_forwardRGB Illumination - Use the included wireless remote to change colors. Control things like the speed, color, mode, brightness and more. It looks great, especially at night!
arrow_forwardWeatherproof - The MRGB10W has been outfitted with the latest weatherproofing techniques for protection against the elements
arrow_forwardCone - Made from Polypropylene, the MRGB10W 10-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long-lasting subwoofers
arrow_forwardVoice Coil - Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material gives our speakers the advantage of longer pay times with lower weights
arrow_forwardSurround - Rubber has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear

Product Highlights
arrow_forwardBuilt-in amplifier: with a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
arrow_forwardVariable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
arrow_forwardHigh level inputs: speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
arrow_forwardLow-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
arrow_forwardVariable bass boost: variable bass boost allows you to adjust the low bass within the boost Range to just the way you like it

Product Highlights
arrow_forwardUpgrade your audio with 300 watts of RMS power, total sonic accuracy, and IP56 marine protection
arrow_forwardSingle voice coil carefully engineered for high performance bass
arrow_forwardDynamic Balance technology gives your rich, clean, full range sound
arrow_forwardEliminated distortion and unwanted resonant frequencies
arrow_forward7.28 inch cutout diameter, 4.13 top mount depth
![[Upgraded] 50W(70W Peak) Bluetooth Speaker 5.0, W-KING IPX6 Waterproof Wireless Outdoor Portable, TF Card Enabled, TWS, DSP, NFC, Powerful Rich Bass Loud Stereo Built-in 8000mAh Battery Power Bank](https://m.media-amazon.com/images/I/51qadCgshfL._SL160_.jpg)
Product Highlights
arrow_forwardHIGH DEFINITION CRYSTAL CLEAR SOUND: With this speaker, you’ll feel as if you’re at a live concert, with clear high notes, deep bass and true HD sound. This advanced Bluetooth speaker has the latest state-of-the-art double 25 WATTS drivers and double passive bass radiators are located on the right and left side of the speaker producing deep, enhanced bass. Premium Bluetooth 5.0 technology effortlessly connects to all of your Bluetooth-enabled devices up to 33ft range.
arrow_forwardCHARGE ALL YOUR PORTABLE DEVICES: Under the sleek yet rugged exterior, there is a massive 8000mAh built-in power bank that will charge your iPhone, Android smartphone, tablet, iPad or action camera.
arrow_forwardCRISP & CRYSTAL CLEAR HD STEREO SOUND: Impeccable audio quality is our main priority. That is why the D8 speaker is equipped with 2 full-range speaker drivers, 2 passive subwoofers and 2 tweeters. It can connect to PC, TV and other non-Bluetooth devices with the included 3.5mm audio jacks. You can also use W-KING bluetooth speaker for hands-free calling.
arrow_forwardDESIGNED TO ENDURE ANY ABUSE: Your loud portable speaker is not only sturdy and shockproof, but also waterproof, dustproof and sandproof. Take it with you on your next camping trip or beach party!
arrow_forwardGET YOUR WIRELESS SPEAKER NOW 100% RISK-FREE: Please use a 5V 2.0A power adapter (not included) to charge your speaker. Your universally compatible portable Bluetooth mobile speaker comes with an exclusive 12-month warranty, so you can place your order with confidence.