No Information to Display
No Information to Display
arrow_forwardHandles up to 1000W peak power (250W RMS): For rich sound.
arrow_forward36 - 300Hz frequency response: For accurate sound reproduction.
arrow_forward85dB sensitivity: Picks up the highs and lows for faithful sound reproduction
arrow_forward11" mounting diameter; 5-7/8" mounting depth: For a proper fit.
arrow_forward12" passive subwoofer: Delivers authoritative bass; 4 ohms impedance: Conducts power to keep speakers working at optimal levels.
arrow_forwardSDR Series Single 15-Inch Dual 2-ohm Loaded Subwoofer Enclosure
arrow_forwardPeak Power: 1,200 Watts | RMS Power: 600 Watts
arrow_forwardPre-wired Internally for a 1 Ohm Final Impedance Load at the Terminals for an Easy Installation
arrow_forwardPremium Vented Enclosure Made of 5/8" MDF and Finished in Black Carpeting
arrow_forwardDouble Front Baffle (1.25") with Countersunk Subwoofer Design for Flush and Attractive Appearance
arrow_forwardCompact Series Monoblock Class D Car / Marine Amplifier
arrow_forwardRMS Power Rating: 4 ohms: 200 watts x 1 chan. / 2 ohms: 300 watts x 1 channel
arrow_forwardMax power output: 600 watts x 1 channel
arrow_forwardPulse Width Modulated MOSFET power supply
arrow_forwardLED power (green) and protect (red) indicators: Soft start turn-on
arrow_forwardSensitivity SPL (1W / 1m) 82 dB, Resonant Frequency 28 Hz
arrow_forwardCustom Tooled High Efficiency Injection Cone, 2 Inch Copper Voice Coil, Rubber Surround
arrow_forwardSealed Enclosure Internal Volume: 1.2 Cubic Feet
arrow_forward5.4 Inch Mounting Height, 11.1 Inch Mounting Hole Diameter
arrow_forwardDimensions: Depth 12.3” x Width 12.3” x Height 5.3”
arrow_forwardPeak Power: 1, 600 Watts | RMS Power: 800 watts
arrow_forward2.6" (65.5mm) dual 2-ohm high temperature 4-layer copper Voice Coil
arrow_forwardPowerful high flux ferrite motor with advanced air Flow Cooling Design | Fs: 44 Hz
arrow_forwardEngineered for incredibly deep, dynamic, and powerful bass | Sensitivity: 83.6 dB
arrow_forwardHigh Roll Foam Surround stitched to competition Grade pressed paper cone
arrow_forwardOutput Coil with Magnetic Shield prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.
arrow_forwardDetachable sliding terminal cover offers a sleek design and easier installation.
arrow_forwardAll terminals and connections are on one side for easier installation and a cleaner look.
arrow_forwardSpeaker Level Input Harness is included to connect to speaker wires from factory installed receivers.
arrow_forwardThe amplifier design is Class D, which uses digital switching power supplies. The result is the amplifier runs more efficiently, generating less heat than Class AB amps. The Class D design also allows the amplifier to be built on a small chassis, and installed where space is limited.