arrow_forwardHumidity measuring range: 5~99.99%RH; Humidity control range: 5~99%RH; Accuracy: ±3%RH
arrow_forwardControl humidity by setting value and differential value; Delay protection for Control output; Query current temperature
arrow_forwardSwitch the modes between humidification and dehumidification automatically;Calibrate the humidity value;
arrow_forwardAlarm when sensor error or humidity exceeds limit;
arrow_forwardAlarm when humidity exceeds high/low humidity setting value;
arrow_forward▼ Air Out ▼ Dimensions L x W x H: 18” x 9” x 2”. ▼ Seven Leaves AC Axial Fan. (Dual fans with power cord).
arrow_forward▼ Freeze protection thermostat. ▼ UL listed components used. ▼ Measure your crawl space vent opening size before purchasing.
arrow_forward▼ Benefits: 1. Reduces moisture in crawl spaces / foundation to protect home and occupants. 2. Increases air circulation to prevent condensation and wood rot. 3. Exhausts vent radon gas, treated wood gases and odors, prevents migrating into living areas. 4. Exchange the outdoor and indoor air, improve room air quality and balance the humidity.
arrow_forward▼ It helps to reduce radon level in crawl space, since radon (density) is heavier than air, radon will precipitate in lower floors. ▼ 100% Stainless Steel 304 Grade panel & housing box for longer life in humid environment. (Better than SS #430 and much better than other brands' Galvanized Steel.)
arrow_forwardRemove Smoke, sodering fumes, flux smoke, odor from soldering stations, workstations, nails, glasswork, pyrography, paint etc quick,safe and efficiently
arrow_forwardSolder smoke fan 496 model equivalent to the 493 plus extra filters. Comes with 3 Active carbon filters, Easily replaceable by swamping out old for new one in filter slot. Pull filter guard out to remove filter and replace with new one. Then push back filter guard to hold filter in place.
arrow_forwardAdjustable tilt for more direct solder smoke absorption from your workbench. Twist knobs at two ends to loosen and then adjust tilt of smoke absorber. Fasten knobs to secure fan front when desired tilt is obtained.
arrow_forwardMade of ESD safe material, lightweight and durable material. Low noise and high- efficient fan operates at acceptable db levels in solder workstations.
arrow_forwardOn/off button located in back of smoke absorber fan. Plugs into AC socket for power. Comes in 493 model box with extra filters.
arrow_forwardCUT COOLING COSTS: Reduce expensive cooling bills at home. Ready to install, our wall-mounted automatic shutter vent fan is designed to help to keep your living space cooler and more comfortable year-round.
arrow_forwardMULTIPURPOSE: Perfect cooling and ventilation solution for any space at your home - including the attic, garage, shed, and more.Corrosion-resistant, the fully enclosed motor is thermally protected and permanently lubricated for easy maintenance.
arrow_forwardVARIABLE SPEED: Customize your comfort. iLiving Exhaust Fan has adjustable speed functionality when combined with the iLIVINGILG8SFSC speed controller (sold separately).
arrow_forwardWEATHER RESISTANT SHUTTERS: Constructed from durable, high-grade aluminum, these shutters can withstand moisture and heatlonger than other competitors’ products adding to the fan’s longevity.
arrow_forwardPOWERFUL AND EFFICIENT: Small but mighty, you’ll enjoy the power and efficiency of iLiving’s Shutter Exhaust Fan. The 18-inch runs onstandard 120 volts at 1/15 HP, 0.85 amps with 1060 rotations per minute, cooling and ventilating an area of 1736 cubic feet per minute!
arrow_forwardMoves air at a rate of 100 CFM, perfect for your bathroom and utility rooms. Notes: no plug, you can wire on a standard house plug.
arrow_forwardLightweight and durable. Long life ball bearing motor (up to 50,000 hours).
arrow_forwardSound at high speed operation is quiet.
arrow_forward2 connections ways for low speed or high speed.
arrow_forwardEasy to install, disassemble and clean when needed.
arrow_forwardQuiet operation at 0.8 sones
arrow_forwardAn indicator light underneath the grille assures you that this quiet fan is running
arrow_forwardAdjustable humidity set points between ~50% to ~80% RH
arrow_forwardWhen humidity is above the user-adjustable set-point, fan runs at full speed (80 CFM). When humidity is below the set-point, the fan runs continuously at a pre-set lower level (0 or 50 CFM)
arrow_forwardENERGY STAR Most Efficient for efficient cost-saving operation
arrow_forwardREDUCES YOUR ENERGY BILL… COOLS YOUR ATTIC & HOME… IMPROVES HVAC & FURNACE PERFORMANCE: Summer months bring higher energy bills, partly because of the limited airflow into your Attic! This solar roof-vent fan Cools attics & Automatically keeps your Home Cooler… taking the stress off your Furnace, HVAC & your Wallet!
arrow_forwardPOWERED BY FREE SOLAR ENERGY… FIGHTS MOISTURE DAMAGE: Finding Moisture Damage in your home can cause severe consequences to your home’s value and your family’s health. This solar exhaust fan is fueled by the Sun & Automatically Combats Moisture!
arrow_forwardBUILT-IN HUMIDISTAT & THERMOSTAT… HYBRID ADAPTER TO RUN AT NIGHT (SOLD SEPERATELY): Heat & Moisture damage your attic & can create HUGE repair bills… Remington Solar’s roof ventilation fan includes a Humidistat & Thermostat to automatically change airflow based on your attic’s needs! In addition, it can also be fitted with our Hybrid Adapter (Sold Separately) to Run at Night!
arrow_forwardLIFE-EXTENDING, BRUSHLESS MOTOR… LITTLE-TO-NO-NOISE… HAIL & WEATHER RESISTANT: This Brushless Motor creates no friction & turns your motor without wear, giving your solar roof fan a longer life! It’s also near-inaudible & comes with a Texas Windstorm Document!
arrow_forwardDESIGNED FOR A LIFETIME OF USE… 100% SATISFACTION GUARANTEE: You have nothing to lose! Simply try our solar powered ventilation fan & if for any reason you aren't satisfied, we'll refund EVERY penny within 30-days! We also back the Fan with a limited Lifetime Warranty!
arrow_forwardEnclosed, thermally protected 120V, 1/8 HP, 3.15 Amp, 220 Watt motor with thermostat and humidistat
arrow_forwardSuitable for ventilating 2,500 sq. ft. attic
arrow_forwardHeavy-gauge galvanized steel fan frame resists rust and corrosion
arrow_forwardFan must be hardwired