10 Best Duda Solar Water Heaters
- Home
- Categories
- Patio, Lawn & Garden
- Generators & Portable Power
- Duda Solar Water Heaters
The 150 Liter Duda solar water heater is composed of a complete package that includes heater control, automatic air vent, storage tank, thermostatic mixing valve, submersible water pump, and propylene glycol.The heater control comprises of the pressure gauge, pressure relief valve, check valve and circulation pump. 150 Liter Duda’s heater control is designed to be efficient and intelligent in terms of providing excellent performance control of your heating device. It has an insulation cover to prevent heat from escaping. Please check our other solar water heater reviews rather than Duda Solar Water Heater Reviews as well.
Its automatic air vent is utilized for an automatic exhaustion of air from hot and cold water pipeline systems The air vent avoids water overflow and air accumulation in pipes which hinder the water flow. 150 Liter Duda heating system’s thermostatic mixing valve has an automatic process of mixing the cold and hot water together depending on your temperature preferences. The submersible water pump functions better for initial charging of solar water heater.
The manufacturer generously provides warranties on the different components of 150 Liter Duda. The collector manifold has a warranty of five years; the stainless steel storage tank has five years of warranty; the evacuated tubes have a warranty of 15 years; other system components are covered with five-year warranty.
In this solar water heater review, 150 Liter Duda is recommended for families who prefer a complete set of components for the heating process. This particular water heater is the best solar water heater as it is OG-100 SRCC Collector certified, which means that this heating device has been thoroughly tested by the Solar Rating and Certification Corporation (SRCC).
We hope that the information we have provided in these Duda Solar Water Heater Reviews was helpful for you and that you were able to choose the right solar water heater for your house, the one that will fit your needs and your price range. If you’re looking for the Duda Solar Water Heater Reviews, you have come to the right place.
Product Highlights
arrow_forward10 year Collector Warranty
arrow_forwardNo Pumps - No Moving Parts - No Glycol
arrow_forwardEasy Installation for DIY or plumber. Is affordable, reliable, and pays for itself as energy prices continue to increase.
arrow_forwardHigh Density Polyurethane Insulation provides excellent heat retention. If the Sunbank is 140 degrees when you go to bed it will be 130 when you wake up.
arrow_forwardShips to the U.S. and Hawaii - contact us for shipping information
Product Highlights
arrow_forwardInner Tank: Food Grade SUS 304-2B, Outer Tank: Galvanized Steel 0.5 mm thickness
arrow_forwardInsulation: high pressure automatic polyurethane foaming layer, Density of 36 kg/m3, R-Value: 12.5
arrow_forwardIn Tank Coil: TU1 copper (Red Copper), thickness: 1mm, Length of Coil:66 ft
arrow_forwardWater Ports: 3/4" NPT, Coil Ports: 1/2" MPT, T/P Valve/Abode Rod/Drain Port: 3/4",
Product Highlights
arrow_forwardHeats one appx. 1 liter water per hour (depends on geographical and weather factors)
arrow_forward90%+ energy conversion efficiency.
arrow_forward100% shipping safety guarantee.
arrow_forward20 1/2" long, 2 1/4" outside diameter, 1 3/4" inside diameter, Double wall structure with vacuum between walls
arrow_forwardMore details see http://www.electric-bike-kit.com/solar-tubes.aspx
Product Highlights
arrow_forwardCapacity: 8 liter/2.1 gallon connection: 1/2 inch NPT pre-charge pressure: 2 bar/29 psi
arrow_forwardMembrane Type: special high temperature EPDM (made in Italy), max fluid temperature: 130°c (266°f)
arrow_forwardColor: red, max pressure: 10 bar (145 psi), tank material: deep draw cold steel
arrow_forwardMembrane certifications: NSF51, hygienic certified, approved by EU and USA institutions
arrow_forwardFlange & connections material: St37, galvanized Carbon steel
Product Highlights
arrow_forwardsolar collector of solar hot water heater
arrow_forward10 Vacuum glass tubes(diameter 58mm, length 500mm)
arrow_forwardManifold: Outer shell: Aluminum Alloy, Thickness:1.8mm;Insulating layer:rock wool overall
arrow_forward10 units of heat pipe is included.(suitable for tube 58*500mm)
arrow_forwardIt can be used as solar collector for solar hot water heating system, for training project, or demon collectors, or as small solar collector for the water heating system at home. etc.
Product Highlights
arrow_forwardCapacity: 12 liter/3.2 gallon connection: 1/2 inch NPT pre-charge pressure: 2 bar/29 psi
arrow_forwardMembrane Type: special high temperature EPDM (made in Italy), max fluid temperature: 130°c (266°f)
arrow_forwardColor: red, max pressure: 10 bar (145 psi), tank material: deep draw cold steel
arrow_forwardMembrane certifications: NSF51, hygienic certified, approved by EU and USA institutions
arrow_forwardFlange & connections material: St37, galvanized Carbon steel
Product Highlights
arrow_forwardInner Tank: Food Grade SUS 304-2B, Outer Tank: Galvanized Steel 0.5 mm thickness
arrow_forwardInsulation: high pressure automatic polyurethane foaming layer, Density of 36 kg/m3, R-Value: 12.5
arrow_forwardIn Tank Coil: TU1 copper (Red Copper), thickness: 1mm, Length of Coil:66 ft
arrow_forwardWater Ports: 3/4" NPT, Coil Ports: 1/2" MPT, T/P Valve/Abode Rod/Drain Port: 3/4",
Product Highlights
arrow_forwardIntelligent fully enclosed working station, temperature differential circulation
arrow_forwardMax pressure: 145 psi, max temp: 130 Degree C, safety valve: 87 psi, flow meter: 0.1~20 L/min
arrow_forwardPump: wilo branches 15/16, max pump head: 18 feet, connections: 1/2, cover material: ST14
arrow_forwardPower consumption: &light;4 Watts, max pump power: 600 Watts, max heating element powerful 1500 Watts
arrow_forwardTimed heating, max temp shut-off, vacation mode, anti-freeze mode, digital flow rate control
Product Highlights
arrow_forwardCapacity: 100 liter/26.4 gallon connection: 1 inch NPT pre-charge pressure: 4 bar/58 psi
arrow_forwardMembrane Type: special high temperature EPDM (made in Italy), max fluid temperature: 130°c (266°f)
arrow_forwardColor: red, max pressure: 10 bar (145 psi), tank material: deep draw cold steel
arrow_forwardMembrane certifications: NSF51, hygienic certified, approved by EU and USA institutions
arrow_forwardFlange & connections material: St37, galvanized Carbon steel
Product Highlights
arrow_forwardCapacity: 50 liter/13.2 gallon connection: 1 inch NPT pre-charge pressure: 2 bar/29 psi
arrow_forwardMembrane Type: special high temperature EPDM (made in Italy), max fluid temperature: 130°c (266°f)
arrow_forwardColor: red, max pressure: 10 bar (145 psi), tank material: deep draw cold steel
arrow_forwardMembrane certifications: NSF51, hygienic certified, approved by EU and USA institutions
arrow_forwardFlange & connections material: St37, galvanized Carbon steel