arrow_forwardFeatures: 12" subwoofer with dual 4-ohm voice coils, Kevlar reinforced pulp cone with HAMR Santoprene rubber surround, Frequency response: 26-200 Hz, Power handling: 600 watts RMS (300 watts per coil), Peak power handling: 1,800 watts, Top-mount depth: 5-1/16", and Grille not included.
arrow_forwardThe new S-Series subwoofers use a new design that’s almost 1-inch shallower than their predecessors
arrow_forwardHigh-excursion underhung voice coil configuration
arrow_forward65mm voice coil with high-temp 5-layer dvc winding on aluminum former
arrow_forwardReinforced parabolic cone structure with pulp/Kevlar con & PP/Mica/Talc Dustcap
arrow_forward5-1/16" mounting depth
arrow_forwardThe Alpine Halo platform has a reputation for accessible, premium technology that modernizes the look and feel of any vehicle.
arrow_forwardBrushed Aluminum Finished Metallic Front Baffle
arrow_forward600 Watts RMS Power Handling, 2 Ohm Final Impedance
arrow_forwardA subwoofer enclosure that sounds as good as it looks. Alpine's preloaded, linkable subwoofer enclosures give you powerful performance with the unique Alpine Halo design.
arrow_forwardThe S-SB12V is built from premium construction materials so you can get the custom look without the custom work. Made from 3/4-inch medium density fiberboard (MDF) with internal edge bracing.
arrow_forward12-Inch Dual 4 ohm Car Subwoofer
arrow_forwardPeak Power: 1, 200 Watts | RMS Power: 600 watts
arrow_forward2.5" 4-Layer high temperature Copper voice Coil
arrow_forwardHigh Roll Foam Surround - High flux ferrite motor
arrow_forwardFrequency response: 22 Hz - 300 Hz | Sensitivity: 84.7 dB
arrow_forwardSWR-8D2 - Alpine 8" Dual 2-Ohm Type-R Series Subwoofer
arrow_forwardKevlar reinforced pulp cone with HAMR Santoprene rubber surround
arrow_forwardPower handling: 150-350 watts RMS (175 watts per coil) | Peak power: 1,000 watts
arrow_forwardSensitivity: 83.5 dB
arrow_forwardTop-mount depth: 4-1/2"
arrow_forwardPro Tuned 12” Single Vented subwoofer enclosure designed for optimum bass response and low frequency reproduction
arrow_forwardCNC Miter and Dado design and construction for the ultimate in air tight precision fit of all parts which ensures a rattle and noise free environment
arrow_forwardSpecially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly
arrow_forwardPneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber
arrow_forwardEnclosure Dimensions Mounting Depth:13.875”, Sub cut out: 11.125”, Height: 13.625”, Width: 16”, Depth: 17.375”
arrow_forwardBuilt-in Amplifier - A built-in 600 Max watt amplifier powers the 10” subwoofer
arrow_forwardPassive Radiator – A driver unit that has its motor structure (magnet) removed, becomes a passive diaphragm. As a result, there is no Chuffing that you would generally get with a ported box, thus enriching the BASS & making the system more linear
arrow_forwardVariable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
arrow_forwardHigh Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the CUBE10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
arrow_forwardPhase Control - Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”