arrow_forwardHeavy duty one piece main tube provides the foundation for precise lens alignment and other components
arrow_forwardExtended-range tactical riflescope with 6-25x magnification and 56mm objective lens
arrow_forwardMil-DotBar reticle; precision controls with 140 MOA adjustment
arrow_forwardThe use of water resistant sealants, synthetic grease and secure O-ring seals protect against fogging
arrow_forward35mm tube diameter; includes mounting rings; matte black finish
arrow_forwardThis optic mounting plate made by ADE Advanced Optics is designed to connect optic sight to certain Smith & Wesson handguns
arrow_forwardThis mounting plate fits SW Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE,SD40VE, M&P Shield
arrow_forwardThis mounting plate does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma
arrow_forwardThis mounting plate fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots.
arrow_forwardAlso Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.
arrow_forwardFits 30mm and 25mm (1 inch) bodies: includes removable 1" inserts
arrow_forwardCompatible with Eotech 512 and 552 optics mounted directly to your flat top receiver
arrow_forwardCompatible with Aimpoint Comp M optic with a Aimpoint mount
arrow_forwardMatte black Finish, Solid No Wiggle Attachment to Rail, Aircraft Grade, Weatherproof and Shockproof, Weight 4.6oz Aluminum
arrow_forwardStandard with six sided bolts for maximum hold under extreme conditions and automatic weapons fire; Ade Advanced Optics Limited Lifetime Warranty
arrow_forwardOffers the brightest Red laser allowed by Law. Non-handheld class 3R laser product, < 5Mw power output. Ultra lightweight and compact 1.79"L x 1.06"W x .85"H
arrow_forwardFit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern (M1913 Pica tinny or Weaver-style) accessory rail
arrow_forwardProprietary mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight: 1.13oz (Battery included).Does NOT fits Berreta due to extra wide trigger guard.
arrow_forwardOperates with one CR1/3N batteries(included). Battery life: 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm
arrow_forwardControlled by ambidextrous switch. It offers two modes: constant-on and strobe. This allows the user to easily set their mode based on personal need or preference
arrow_forwardPromotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery
arrow_forwardThe red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield Ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45
arrow_forwardRed dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off
arrow_forward1.75" length x1.25" width x1.15" height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation adjustments with audible click
arrow_forward6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate. Additional mounting plates for hunguns sells separately
arrow_forwardThis is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2" for better eye relief.
arrow_forwardADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher
arrow_forwardOur 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.
arrow_forwardThe Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings
arrow_forwardHeight" 1.5". Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty.
arrow_forwardComes with an removable standard picatinny mount and handgun mount(replace rear sight) fits CERTAIN SW models such as Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, M&P Shield, SD9VE, SD40VE.
arrow_forwardThe pistol mount included for SW does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma, 1911
arrow_forwardThis ADE RD3-009 Crusader have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon.
arrow_forwardWaterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
arrow_forwardFully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
arrow_forwardRed Dot with 6 brightness level and Night Vision Sight, Light and Compact, Heavy Duty, Designed for Real Fire Caliber
arrow_forwardShock proof, Rain Proof and Fog Proof. Feature 1 M.O.A windage and elevation adjustments with audible click
arrow_forwardMagnification: 1.0x . Exit Pupil: 22-33 mm. Weight (net): 115g (4.0 ounce). Integrated 21mm weaver mount base
arrow_forward3 MOA Dot, Light and Compact. Operates with 2023 battery. Lens is over 1/2 thick and made of impact resistant lens optical grade glass
arrow_forward5 years manufacturer limited warranty
arrow_forwardMachined from lightweight, extremely durable 7075 aluminum, Mil-Spec hard anodized
arrow_forwardSame height above bore as standard-issue sights
arrow_forwardLow-profile sights extend only .2" above top rail, don't interfere with primary optics or military IR illuminator /laser sight
arrow_forwardAmbidextrous sights easily and securely mount to Picatinny rails using a flathead screwdriver
arrow_forward.50 MOA elevation and windage adjustments. Rear sight:3oz / Front sight:1.5oz
arrow_forwardComes with an removable standard picatinny mount and handgun mount(replace rear sight) fits CERTAIN SW models such as Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE,SD40VE, M&P Shield
arrow_forwardThe pistol mount included for SW does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma, 1911.
arrow_forwardWe have made several improvements for thi RD3-006X since it's initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon.
arrow_forwardShock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
arrow_forward3 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included). The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side.